How To Install Jl Audio Fix 86 On Stock Radio
- Overview
- Specifications
- Reviews
JL Sound Set up-86 OEM Integration DSP With Automated Time Correction is a state-of-the-fine art digital signal processor engineered to deliver outstanding sound from factory source units, while retaining OEM fader command.
The Set up™ 86 automatically corrects time-delayed factory outputs prior to betoken summing and EQ correction. Calibration takes just a unmarried button printing and about 30 seconds to complete, with no special equipment needed.
Main Features:
- With a powerful 24-bit DSP processor and quad one/3 octave equalizers onboard, circuitous factory signals, upwards to 3-way front and 2-fashion rear, are combined and level matched automatically into six, total-range stereo signals: Forepart (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, forepart+rear summed) outputs.
- By connecting a PC running TüN™ Software via USB, you can likewise access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments can be made to input polarity, muting and filtering, and new calibrations can be initiated from the PC as well. By clicking on the "TUNE" tab of the TüN™ interface, you can also access four, user-adjustable, 10-band, graphic equalizers to fine tune the output signals.
- Differential-balanced inputs accept virtually any OEM analog audio betoken, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).
- Activation methods include 12-volt or Auto Turn-On (Signal/DC-Get-go Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment.
- An optional DRC-100 or DRC-200 Digital Remote Controller (sold separately) adds Master Book Control and/or Subwoofer Level Command from the driver'south seat.
Specifications
availability
Online, Store
Ability Supply Type
Regulated DC-DC SMPS
Input Operating Voltage
x – 16 VDC
Standby Current Depict
<i.v mA
Operating Current Draw
0.vii A
Recommended Fuse Value
1 A
Input Type
Differential-Balanced
Input Voltage Range
250 mV – thirty 5 RMS
Minimum Input Voltage
ten mV RMS
Input Level Setting
Fully automatic
Output Channels
6 (Front/Rear/Sub Output Pairs)
Analog Output
Unbalanced, stereo RCA jacks
S/N Ratio
96 dB (A-Weighted, referred to 4V RMS Output)
THD+N @ Rated Output
0.02% (20 Hz – 20 kHz)
Point Processing
Audio Resolution — 24 flake / 48 kHz
Number of EQ Bands — thirty 10 two channels
EQ Resolution — one/3 octave (25 Hz – xx kHz)
Remote Level Control — Optional (DRC-100 or DRC-200)
Remote Level Functions — Primary Volume Control, Handsfree Optimization, LED Condition Reporting (DRC-205 adds Subwoofer Level Control)
JL Sound Set up-86 OEM Integration DSP With Automatic Time Correction is a country-of-the-fine art digital signal processor engineered to evangelize outstanding sound from factory source units, while retaining OEM fader control.
The Set™ 86 automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.
Principal Features:
- With a powerful 24-chip DSP processor and quad 1/iii octave equalizers onboard, circuitous factory signals, up to 3-way front end and ii-style rear, are combined and level matched automatically into vi, full-range stereo signals: Front (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, forepart+rear summed) outputs.
- By connecting a PC running TüN™ Software via USB, you can too access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments tin be made to input polarity, muting and filtering, and new calibrations can exist initiated from the PC also. By clicking on the "Tune" tab of the TüN™ interface, you can also admission 4, user-adjustable, 10-band, graphic equalizers to fine tune the output signals.
- Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to loftier-power, amplified speaker-level outputs (upwardly to 30V RMS).
- Activation methods include 12-volt or Auto Turn-On (Signal/DC-First Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment.
- An optional DRC-100 or DRC-200 Digital Remote Controller (sold separately) adds Master Volume Control and/or Subwoofer Level Control from the driver's seat.
Specifications
availability
Online, Store
Ability Supply Type
Regulated DC-DC SMPS
Input Operating Voltage
10 – 16 VDC
Standby Current Draw
<1.five mA
Operating Electric current Depict
0.7 A
Recommended Fuse Value
i A
Input Type
Differential-Balanced
Input Voltage Range
250 mV – 30 5 RMS
Minimum Input Voltage
ten mV RMS
Input Level Setting
Fully automated
Output Channels
half-dozen (Front/Rear/Sub Output Pairs)
Analog Output
Unbalanced, stereo RCA jacks
S/Northward Ratio
96 dB (A-Weighted, referred to 4V RMS Output)
THD+Due north @ Rated Output
0.02% (xx Hz – 20 kHz)
Indicate Processing
Sound Resolution — 24 bit / 48 kHz
Number of EQ Bands — xxx x 2 channels
EQ Resolution — 1/three octave (25 Hz – 20 kHz)
Remote Level Control — Optional (DRC-100 or DRC-200)
Remote Level Functions — Master Book Command, Handsfree Optimization, LED Status Reporting (DRC-205 adds Subwoofer Level Control)
How To Install Jl Audio Fix 86 On Stock Radio,
Source: https://lifestylestore.com.au/product/jl-audio-fix-86-oem-integration-dsp-with-automatic-time-correction/
Posted by: hunttherlhe.blogspot.com
0 Response to "How To Install Jl Audio Fix 86 On Stock Radio"
Post a Comment